SCOUT 800 rEWORK

Post your Binder related Tech here.

Moderators: Toyman1994, TallGuy, Tice, Ashman

SCOUT 800 rEWORK

Unread postby NAW_T » Fri Sep 28, 2012 10:28 am

Just now getting to where I can work on the crawler.
Specs/Parts accumilated;
1971 Scout 800B bobbed 17 inches in rear, Scout 80 top with fold down windshield grafted in, half doors.
Dana 60 King pin front 4 link with QA1 ends and stock early Bronco Coils
Rear 60 30 spline and 4 Linked with square tubing and tractor joints...
4.3 TBi/propane dual fuel kit, 700r4, 231c, dana 300
Crap cage that I hit my head on if I sit in the dang thing.
37 Hummers one H1 Rims trailready rings.
Have a set of 5.89 gears welded for the 60's.
Rancho 9000 shocks.
Warn XD9000i
Orbital out of a CASE tractor and Dual ended ram 8" stroke.
Needs Assembly...hahahah

Will be built from mainly parts on hand or Junk Yards to keep cost down.

Finish front 4 link and try and lower 4-5".
Rear suspension needs work, current tracto joints and square tubing were to get it on a trailer. has a 14 bolt under it.
Steering
Drive shafts
Brake lines
A/C
OBA
Cage
Pinch the front???
Install doubler.
Feul tank and lines.
Install Gears in Axles.
Bumpers
Image
2004 Jeep LJ. Awaiting build time... HP 60 ARB shaved 14 bolt 5.13 gears 14" ORI's
2 Seat buggy. 60's, sticky 40's, T-lockers 5.89 gears
Wifes...70 Powerwagon 4BT, Locked chromo's 5 speed.
NAW_T
Training Wheels
 
Posts: 97
Joined: Sun Feb 13, 2011 8:32 am
Location: NW Tucson

Re: SCOUT 800 rEWORK

Unread postby NAW_T » Fri Sep 28, 2012 10:29 am

Image
2004 Jeep LJ. Awaiting build time... HP 60 ARB shaved 14 bolt 5.13 gears 14" ORI's
2 Seat buggy. 60's, sticky 40's, T-lockers 5.89 gears
Wifes...70 Powerwagon 4BT, Locked chromo's 5 speed.
NAW_T
Training Wheels
 
Posts: 97
Joined: Sun Feb 13, 2011 8:32 am
Location: NW Tucson

Re: SCOUT 800 rEWORK

Unread postby NAW_T » Fri Sep 28, 2012 10:40 am

Starting with the rear.
Install 5.89 Gears in Rear 60.
Suspension Option 1:
Remove 4 rod ends from the front and put them on the rear with bushings on all the axle ends. 4 link front and rear.
Option 2:
Leave front with Rod ends at all ends and 1-link the rear with a joint 360.
Also have a set of Mercedes Benz coils that are a bit taller than the stock Cherokee Springs that are in there currently.
I will be outboarding them one way or another.

To Be continued.....
2004 Jeep LJ. Awaiting build time... HP 60 ARB shaved 14 bolt 5.13 gears 14" ORI's
2 Seat buggy. 60's, sticky 40's, T-lockers 5.89 gears
Wifes...70 Powerwagon 4BT, Locked chromo's 5 speed.
NAW_T
Training Wheels
 
Posts: 97
Joined: Sun Feb 13, 2011 8:32 am
Location: NW Tucson

Re: SCOUT 800 rEWORK

Unread postby CHEVYNTOY4X4 » Wed Oct 03, 2012 10:10 am

Looks like a fun build, when up had a bodied rig mine was "pinched" in the front end, from the firewall width to the width of the radiator. I loved it never hit my front on anything, great for having to climb sidewalls up falls. Its about time other people start building some things :cheers:
ITS NOT ABOUT HOW FAR YOU GO ITS WHAT YOU BREAK ALONG THE WAY

SHITLLFABOUT ind.

86 yota sas'd

Keystone Crawler
User avatar
CHEVYNTOY4X4
Supporting Member
Supporting Member
 
Posts: 1092
Joined: Wed Apr 04, 2007 7:14 pm
Location: glendale

Re: SCOUT 800 rEWORK

Unread postby NAW_T » Sat Nov 17, 2012 9:37 pm

Slow post but i have been working. Got to play with the new to me miller plasma cutter. cut some brackets to shorten up the front 4 link arms. drivers side is done. pulled the t-case (213C) cut it in half and started to add a dana 300 to it. Need to get the spacer welded in and twin stick the 300 re-install. Still not sure what I want done with the rear. Have everything to one link it just with a 4 link i can have a flat belly front to back. Did not realize balistic was not open on Sat. needed a few more joints.

Picked a tank up from a friend. need to move the rear cross member forward a bit so the tank will fit.

Sooo want to wheel.
2004 Jeep LJ. Awaiting build time... HP 60 ARB shaved 14 bolt 5.13 gears 14" ORI's
2 Seat buggy. 60's, sticky 40's, T-lockers 5.89 gears
Wifes...70 Powerwagon 4BT, Locked chromo's 5 speed.
NAW_T
Training Wheels
 
Posts: 97
Joined: Sun Feb 13, 2011 8:32 am
Location: NW Tucson

Re: SCOUT 800 rEWORK

Unread postby NAW_T » Sun Jan 20, 2013 10:26 pm

Been Working it....
Ballistic coil buckets. lowered it 4 inches
Image

Cup holder
Image

Tank in from a YJ
Image
2004 Jeep LJ. Awaiting build time... HP 60 ARB shaved 14 bolt 5.13 gears 14" ORI's
2 Seat buggy. 60's, sticky 40's, T-lockers 5.89 gears
Wifes...70 Powerwagon 4BT, Locked chromo's 5 speed.
NAW_T
Training Wheels
 
Posts: 97
Joined: Sun Feb 13, 2011 8:32 am
Location: NW Tucson

Re: SCOUT 800 rEWORK

Unread postby NAW_T » Sun Jan 20, 2013 10:31 pm

Rear Bumper
Image

Doubler together-ish
Image

Front Bumper
Image

Lift Point
Image

Got the arms shortened up a bit with better mounts.
2004 Jeep LJ. Awaiting build time... HP 60 ARB shaved 14 bolt 5.13 gears 14" ORI's
2 Seat buggy. 60's, sticky 40's, T-lockers 5.89 gears
Wifes...70 Powerwagon 4BT, Locked chromo's 5 speed.
NAW_T
Training Wheels
 
Posts: 97
Joined: Sun Feb 13, 2011 8:32 am
Location: NW Tucson

Re: SCOUT 800 rEWORK

Unread postby NAW_T » Fri Mar 15, 2013 8:52 pm

1. slow updates suck!
2. i am ready (mentally) to wheel
3. Got some parts.

Sold some axles, rims, tires and such.
turned said funds into

Ballistic 14 bolt shave kit
Front ARB for the 60
5.38 gears.
Will weld the 14 bolt if i cant find a good deal on a locker.

HOPEfully i will be able to get back to work on the scout.

Been collecting and building a dana 44 with 4.10's, hysteer/crossover and a truetrac for my wife's Powerwagon.
Shoud hav ehtis axle in this weekend and finish up powersteering for it also.
2004 Jeep LJ. Awaiting build time... HP 60 ARB shaved 14 bolt 5.13 gears 14" ORI's
2 Seat buggy. 60's, sticky 40's, T-lockers 5.89 gears
Wifes...70 Powerwagon 4BT, Locked chromo's 5 speed.
NAW_T
Training Wheels
 
Posts: 97
Joined: Sun Feb 13, 2011 8:32 am
Location: NW Tucson


Return to Binder Tech

Who is online

Users browsing this forum: No registered users and 1 guest

cron