axle swap help...

Post your Jeep related Tech here.

Moderators: Toyman1994, TallGuy, Tice, Ashman

axle swap help...

Unread postby blackd-out-chev » Fri Mar 27, 2009 8:39 pm

ok ok i know it has probably been posted 50x before...but my computer is being gay and really slow... i wana put dana 44s under my 88 xj and found a pair from a wagoneer for a good deal...the front on the waggy was leaf and my xj is coil hard is it to make all new mounts and junk??? is there a kit out there to just do it??? thanks and sorry for the post.... :zzz:
User avatar
Posts: 856
Joined: Sun Oct 19, 2008 8:03 pm
Location: UnDeR tHe JeEp

Unread postby scrambler 82 » Fri Mar 27, 2009 8:58 pm

Not hard at all if you know what to do :naughty: You should be able to cut and or copy your mounts on the 30 and 35 axles and weld on the old or copied on the new 44's.

Sounds easy right?

It really is, just measure everything out twice, tack bolt up and make certain everything is correct before finish welding!
D60 rear, 60 front 3 linked, spools, 5.38's and 39.5 IROK's, auto and a little 6 banger!
User avatar
scrambler 82
Top Dawg
Top Dawg
Posts: 1818
Joined: Thu Jan 19, 2006 7:29 pm
Location: Kearny,Az

Unread postby BackNBlackTJ » Fri Mar 27, 2009 8:59 pm

There are several companies that make coil kits for TJ/XJ

Rubicon Express

I used Ballistic brackets when I put the furd HP44 under the front of my TJ
98' TJ, 4.0, AX15, blah, blah, blah, mangled sheet metal, and rattle can paint.
User avatar
Training Wheels
Posts: 53
Joined: Tue Jun 01, 2004 5:04 pm
Location: Marana, AZ

Return to Jeep Tech

Who is online

Users browsing this forum: No registered users and 1 guest