Diy highline. Anyone in Tucson done it yet?

Post your Jeep related Tech here.

Moderators: Toyman1994, TallGuy, Tice, Ashman

Diy highline. Anyone in Tucson done it yet?

Unread postby 4x4ndad » Mon Feb 09, 2009 2:51 pm

Looking for information on diy highline kit.. Iv'e been to the higher ground site and iv'e pretty much got the jist of it but I get the feeling it would be easier i f I had a little back-up by someone who's allready done it.. Beer and pizza anyone...
Just another Tj owner looking for his village.
4x4ndad
Training Wheels
 
Posts: 10
Joined: Mon Feb 09, 2009 2:30 pm
Location: Oro Valley

Unread postby hayseed » Mon Feb 09, 2009 7:28 pm

I have to ask what is a diy highline?
Rocking J Offroad
1941 W. Gardner LN.
Tucson, AZ 85705
(520) 834-4242
Specializing in rock crawler custom fabrication, chassis, suspension, and drive train.
Check out our website! http://www.rockingjoffroad.com
User avatar
hayseed
WAZ Vendor
WAZ Vendor
 
Posts: 764
Joined: Wed Aug 15, 2007 8:06 pm
Location: Tucson, AZ

Unread postby TallGuy » Mon Feb 09, 2009 8:13 pm

x2 - I have no idea what you are talking about. :scratching:
User avatar
TallGuy
Moderator
Moderator
 
Posts: 5334
Joined: Fri May 16, 2003 11:14 am
Location: Safford

Unread postby Flop » Mon Feb 09, 2009 10:04 pm

It's kinda a cool project, you cut approximately 3 inches off the bottom of the hood, then re-mount the fenders "up" 3 inches to match the new and cut hood. So, for tire clearance, the fenders end up with 3" more clearance, give or take. If I were going to do it though, I'd prolly ditch the stock fenders for some nice home-built tube fenders. :thumb:
Part Dodge
Part Chevy
Part Humvee
Mostly Jeep...

All American.
User avatar
Flop
Boggers
Boggers
 
Posts: 1157
Joined: Fri Jan 21, 2005 7:53 pm
Location: S A F F O R D

Dyi highline

Unread postby 4x4ndad » Thu Feb 12, 2009 7:29 pm

I was thinking about going with tube fenders I've got access to all the fun stuff, But tubing and plate cost money that'll need to be spent elsewhere with room for bigger rubber, only running 31s at the moment with a 2" bb, looking at 35s and gears and an 8.8 swap.
Just another Tj owner looking for his village.
4x4ndad
Training Wheels
 
Posts: 10
Joined: Mon Feb 09, 2009 2:30 pm
Location: Oro Valley

Unread postby 4x4ndad » Mon Feb 16, 2009 7:32 pm

Just another Tj owner looking for his village.
4x4ndad
Training Wheels
 
Posts: 10
Joined: Mon Feb 09, 2009 2:30 pm
Location: Oro Valley

Unread postby JJUST blazen » Wed Feb 18, 2009 10:55 pm

i vote to get rid of the jeep section :flipoff: :flipoff:



lol......... thought i just had to post somthin :roll: :D
YOU NEVER BREAK IT..... YOU IMPROVE IT!!!

JUNK SPEC =
89 blazer wedged rear,wedged front ,5.7,sm465,205,ff14 rear diff miller locked, 44 front aussie locked (f-in junk),4intc ez ride front leaf,6in tc ez rides out back,39.5 16.5'sXTS with beadlocks


TigMig quote: Welcome, and why do the Toyota guys always have so many hammers?
User avatar
JJUST blazen
Supporting Member
Supporting Member
 
Posts: 893
Joined: Sun Aug 24, 2008 2:36 pm
Location: BIGGEST ANT HILL IN ARIZONA!!!


Return to Jeep Tech

Who is online

Users browsing this forum: No registered users and 1 guest

cron